Tag Archives: tools
Step 5. Lost wax Casting reproduction using wax injection. 21083
This is the fifth step in the reproduction process I use for making my jewelry. After the mold compound has hardened for 2 hours I use a crock pot to de-wax the model before putting it into the furnace. Duration … Continue reading
Step 2. Lost wax Casting reproduction using wax injection. 21083
This is the second step in the reproduction process I use for making my jewelry. Here I have begun building the sprue tree so I can cast several pieces in one flask. If you like my videos, please subscribe. Duration … Continue reading
Step 7. Lost wax Casting reproduction using wax injection. 21083
This is the seventh step in the reproduction process I use for making my jewelry. After the metal has cooled to about 900F the mold is broken by dunking it in cold water. This is probably my favorite part. Duration … Continue reading
Step 6. Lost wax Casting reproduction using wax injection. 21083
This is the sixth step in the reproduction process I use for making my jewelry. After the molds have been fully de-waxed and tempered in the furnace for 12-24 hrs the molten metal is poured into the molds. Duration : … Continue reading
Step 1. Lost wax Casting reproduction using wax injection. 21083
This is the first step in the reproduction process I use for making my jewelry. The injection machine I have is made by Jelrus/Romanoff. I have the best success injecting at about 12-14 psi. Duration : 0:0:35