Love Casting

Things don’t always go well in the home foundry.

Duration : 0:4:58

(more…)

This is the seventh step in the reproduction process I use for making my jewelry. After the metal has cooled to about 900F the mold is broken by dunking it in cold water. This is probably my favorite part.

Duration : 0:1:5

(more…)

Casting parts for a model engine in alloy.

Duration : 0:9:39

(more…)

28mm Scale Roman Empire Legionaries can be cast using Prince August Rubber Moulds. Each mould can cast hundreds of times and it only takes 5 minutes to cast. This guide shows you how to make one from scratch. they are available online at princeaugust.ie

Duration : 0:2:44

(more…)

This is the sixth step in the reproduction process I use for making my jewelry. After the molds have been fully de-waxed and tempered in the furnace for 12-24 hrs the molten metal is poured into the molds.

Duration : 0:1:45

(more…)

This is the first step in the reproduction process I use for making my jewelry. The injection machine I have is made by Jelrus/Romanoff. I have the best success injecting at about 12-14 psi.

Duration : 0:0:35

(more…)

How to make a casting from making the sand mould to the finished item. The video has been edited to fit the 10 minute time limit of You tube. It takes much longer than this!

Duration : 0:9:25

(more…)

In part one I made the sand mould. Now I melt metal and complete the casting.

Duration : 0:7:43

(more…)

How to make a greensand mould using a loose piece.

Duration : 0:7:23

(more…)

The first video in my 11 part series showing how I make alloy castings in my home made foundry.
Part one shows how the mould is made and in part two the metal is melted and poured.

Duration : 0:9:58

(more…)