Love Casting

Slayer Espresso – Road Trip to the Stainless Steel Foundry

Duration : 0:2:55

(more…)

Check out my website: http://www.budgiemetalworks.ca
This is the first casting in my homemade aluminum foundry. Approximately 5 lbs of aluminum was poured here which took about 2 hours to melt. The furnace draws 20A on 220VAC.
It was built from plans bought at http://www.dansworkshop.com/
The element was custom made for me at a pottery kiln shop, the body of the furnace is made from firebricks and commercial refractory. The tools for handling the crucible were made by myself. The amperage controller is sitting on the pink foam on the floor, I’ll be enclosing it properly but wanted to try it out first. The crucible was bought from Canadian Thermix, a really nice company to work with. The final furnace took about 6 months to complete, working on it every couple weekends, and I expect to get a lot of use from it.

Duration : 0:4:35

(more…)

This will be a multi part video on foundry pattern making. A wooden pattern is used to make an impression in the sand mold. A silica sand core is inserted to produce the cylinder bore in the casting. A wood pattern of the cylinder is turned on the Clausing lathe.

Duration : 0:9:44

(more…)

This will be a multi part video on foundry pattern making. A wooden pattern is used to make an impression in the sand mold. A silica sand core is inserted to produce the cylinder bore in the casting. A wood pattern of the cylinder is turned on the Clausing lathe.

Duration : 0:9:20

(more…)