-
Archives
-
Meta
Tag Archives: casting
RoboCNC Router : Part 08 :Casting a aluminium dust collector. (Lost foam)
[ Full info @ http://www.robocnc.nl/?page_id=381 ] Making a dustcollector for my cnc router. Used the lost foam method. Result is very rough, how can i improve this? Thanks… Duration : 0:7:18
Bronze Casting 10 14 08
West Valley College Bronze casting Fall 08 on 10/14/08. One leaking mold Duration : 0:4:47
Sand Casting The River Boat Bell Part 1 of 6 Intro
The Santa Fe Forge & The Santa Fe Artist Guild Invite you to watch as they attemp to recreat the Famous River Boat bell. please note no modern tools were used in this project only coal and coke were used … Continue reading
Case Study -Prototype Aluminum Casting without tooling
Mark Garofano of Armstrong Mold discusses ability to manufacture aluminum casting without tooling using lost RP model and RPM casting process. One week delivery is attainable. Duration : 0:1:42
Posted in aluminum casting
Tagged A356, aluminum, ArmstrongMold, casting, plaster-mold, prototype, quickturn, RP, RPM
Comments Off
Lost Wax Casting
Lost-Wax Bronze Casting. Wax sculptures are “burned out” of the silica sand shell mold which was formed over the wax. The remaining empty shells are filled with 2300 degree molten bronze. Duration : 0:5:39
Posted in lost wax casting
Tagged Andrew Wilks, bronze, casting, crucuble, lost wax casting, sculpture, shell mold
2 Comments
Aluminium die pressure casting
Aluminium die pressure casting Duration : 0:3:41
casting valencia frikis
casting valrencia frikis Duration : 0:1:23
WVC Bronze Casting 102709 2
West Valley College Bronze Casting 10/27/09 Featuring Mike and Yori as “Crucible guys” and Tara as “Hooker” Shortened version but a test to see if it is clearer Duration : 0:4:6
Hot Glass Sand Casting (001)
Hot glass sand casting at The Glass Bubble Project in Cleveland,Ohio. Main Artist: Bruce Golovan. A design was made in the sand and hot glass is poured into the mold.Once the glass cools down it is placed into the annealer … Continue reading