Love Casting » lost wax casting

RDO Flex Cast – Gold, Platinum, Palladium Lost Wax Casting System

admin — Sun, 11 Jul 2010 20:06:15 +0000

The Flex Cast system is the latest technology in lost wax casting. Using a pressure over vacuum method of casting for gold as well as high temperature alloys such as Platinum and Palladium. This patented technology incorporates a unique process that eliminates the use of traditional crucibles and metal flasks. The small bench-top system uses a powerful 4kW induction heating generator for fast melt cycles of all alloys.

Duration : 0:3:20

[youtube 1uqAKaU8Oqc]

Lost wax process video with details by sushil sakhuja bastar.INDIA

admin — Wed, 07 Jul 2010 10:20:18 +0000

DHOKRA PROCESS THE INDIAN STYLE METAL CASTING(BRASS-BRONZE) WITH DETAILS (BIG FILE)

Duration : 0:9:29

[youtube ffg07yxr_Vs]

Step 3. Lost wax Casting reproduction using wax injection. 21083

admin — Sat, 03 Jul 2010 01:18:27 +0000

This is the Third step in the reproduction process I use for making my jewelry. I say “a little time has elapsed” but the truth is it was more like several hours to build the sprue tree.

Duration : 0:0:31

[youtube 6cZU0uLM8BY]

LOST WAX CASTING (MANUFACTURE)

admin — Mon, 28 Jun 2010 07:50:21 +0000

The methods used for small parts and jewellery, in this example it is with CNC , BOBCAD & Mach 3

Duration : 0:1:20

[youtube tSGTmrh0h9E]

Is it possible to slow down the speed of a machine by reducing voltage/wattage?

admin — Sun, 27 Jun 2010 09:29:29 +0000

I have a Dremel (small drill) that I am using to carve/drill wax for lost wax casting. I bought the machine, not knowing how *holy crap* fast it is, and it actually melts the wax when I am using it on it’s slowest setting. Is there any way I can slow it down beyond its slowest speed?

Any ideas of how to do this will be greatly appreciated!

That is a tricky situation. If it is a cordless dremel you could allow the battery to drain most of the way before using it but then you are limited with time to use it before it dies. If it is a corded dremel, which I assume it is.. Then one thing I could think of is to add a little slipper brake to it. The little metal post you push in when changing your attachments that locks into the chuck and doesn’t allow it to spin so you can use a wrench to loosen it. Maybe try popping the plastic shroud off and putting some electrical tape at the end of the post that goes into the chuck. By doing this, it wouldn’t lock into the chuck.. all you would have to do is push down gently on the metal post while using your dremel and it would create friction to slow the speed down a bit. Other than that, lowering the voltage would result in it not working properly. You would have to change the current path on the circuit board to successfully pull that off. You could also always go to a Hobby Lobby and buy one of those cheap $10- $15 dollar battery powered wood engravers. They don’t pack much power. Good luck, hope some of this helps.

Lost Wax Casting Process

admin — Wed, 23 Jun 2010 07:45:07 +0000

Duration : 0:6:5

[youtube L4VKFqu53DQ]

Strickly Boarding How it’s made surf video lost wax casting

admin — Fri, 18 Jun 2010 12:12:17 +0000

Strickly Boarding gives you an exclusive backstage pass on how our surf jewelry products are made using the lost wax casting process of casting .925 sterling silver.

Duration : 0:9:58

[youtube Q1IqbHUC32s]

Wax / Batik Technique: Silk Painting with Jill Kennedy

admin — Mon, 14 Jun 2010 11:22:21 +0000

DVD Title: Silk Painting with Jill Kennedy

Jill Kennedy is the famous UK author of several books on her favorite art — silk painting. In this DVD she demonstrates 10 of her most called upon techniques for creating fantastic designs in silk. In this excerpt she demonstrates how wax often is preferential to gutta or other resists for it’s ability to contain or hold colors and be used in larger areas while providing similar effects to gutta’s ability to contain dye within regions. Here she emphasizes the ability to work with dyes immediately after application and demonstrates how fun it is to use traditional Indonesian tjantings and Japanese brushes to create “Pisces” or the “twin fish” design in the scarf she is working on.

Duration : 0:2:43

[youtube ToXWQH6yi5w]

WAX SPITS RANDOMLY!!!! (continuation of rap tag)

admin — Thu, 10 Jun 2010 07:06:33 +0000

Wax rhythmically saying words that rhyme in reference to various topics. This is a response to this video:

http://www.youtube.com/watch?v=zDUyY8eS03c

Peace to the Name Brand Clique. Thanks for calling me out!

Make sure to cop the album “Liquid Courage” by Wax and EOM on itunes. While you’re there pick up “Grizzly Season” by Wax and Herbal T!!!!

Duration : 0:4:32

[youtube er8HBGqbmWQ]

Lost wax casting

admin — Fri, 28 May 2010 20:15:36 +0000

Lost wax centrifugal casting demo from http://www.ajhjewellery.com

Duration : 0:2:26

[youtube WuWrxgYcVJA]